Mercedes-Benz C-Class: How to Install Door Speakers. How to Install Door Speakers Akadan, vic viper, ICON 1 Get better sound in your car by installing new door speakers. This article applies to the Mercedes-Benz C-Class w204 (2007-2014). So you got a used C-Class.

Materials Needed • Subwoofer • Line output connector • Power wire • Speaker wire • Ground wire • Crimp connectors • Ring connectors • Torx screwdriver • Flat head screwdriver • Wire cutter/stripper • Cable ties • Electrical tape Disconnect the battery before you begin working on the wiring. Usually, subwoofers are installed along with an amplifier. If you plan on using a subwoofer without an amplifier, make sure that it's a powered subwoofer.

(Related Article: - MBWorld.org) Step 1 – Decide where you want to install the subwoofer Most people install their subwoofers in an enclosure in the trunk. If you have the Harman-Kardon sound package, then you already have a subwoofer installed in the rear deck. You could potentially replace this subwoofer with a small aftermarket subwoofer, but it won't be as powerful or secure as an enclosure.

Other options include fitting them under the seats, in the doors, or on the sides of the trunk. It all depends on the size and shape of the subwoofer.

Gratis game ps2 untuk pc tanpa emulator games android. Subwoofer located in the side of the trunk. Step 2 – Prepare the space for the subwoofer If you're trying to fit an enclosure in your trunk, you will lose most of your cargo space. If you want to save some of that cargo space, it'll take a little creative thinking. If you have satellite radio, the controller is installed in a tray at the bottom of the trunk.

You can remove this tray, and relocate the controller to give yourself a couple more precious inches to work with inside the trunk. Satellite controller tray. Step 3 – Route your wiring If you've already installed an amplifier, then most of your wiring is already finished and you just need to plug in the subwoofer as well as the ground wire.

For a powered subwoofer, you're going to need to crimp your subwoofer's power wire to a nearby 12 volt power source, either at the rear fuse box or SAM module. To connect your subwoofer to the stereo, you can tap into the wires of the factory subwoofer. Otherwise, you're going to have to remove the stereo, and install a harness that you'll have to route to the subwoofer. Factory subwoofer wires behind driver's rear side cushion. Pro Tip Make sure that your power and ground wires are the appropriate gauge for the subwoofer. Batik mega mendung vector images. Step 4 – Mount your subwoofer Set your subwoofer in your car, and secure it by either strapping it down or installing a mounting bracket.

Do the same for your line output connector. Plug in the speaker wires to the line output connector, and then plug the RCA cables into the subwoofer. Connect the ground wire to the subwoofer and secure it to the nearest grounding point.