I have an hp pavilion g6 2342dx with an amd a8 4500m apu and windows 7 pro 64 bit with eight gigs of ram i believe the socket types is fs1 (r2) the bios is insyde f.26 i have read the manual and it only mentions the amd a10 4600m and this is only a marginal upgrade from the a8 i have so i was wondering if my notebook would support a newer a10 model such as the 5750m,and if it would be plug and play (i can change it) or if i would run into problems with the bios or be limited by hardware. On a less important side note would i be able to use the 1866 ram that is supported by the 5750m or would the mother board limit that to 1600 i never understood whether my apu or board was the limitation.

Drivers and Manuals Support Gateway Products Acer Answers Register Register a Product Contact Acer Acer community Alerts & Recalls Intel Security Bulletins Warranty information Standard Warranty ITW: International Travelers Warranty. Supports Intel ® HD Graphics Built-in Visuals: Intel ® Quick Sync Video, Intel ® InTru™ 3D, Intel ® Clear Video HD Technology, Intel ® HD Graphics 2000/3000, Intel ® Advanced Vector Extensions (AVX) with Intel ® Sandy Bridge CPU - Pixel Shader 5.0, DirectX 11 with Intel ® Ivy Bridge CPU. Pixel Shader 4.1, DirectX 10.1 with Intel.

Many thanks in advance for any information.

CPU-Z uses a configuration file, cpuz.ini, that allows to set several parameters for the program. The cpuz.ini file must be in the same directory as cpuz.exe.

Note that the use of this file is optional. If no.ini file is found, default values will be used. It looks like this: [CPU-Z] TextFontName=Verdana TextFontSize=13 TextFontColor=000060 LabelFontName=Verdana LabelFontSize=13 PCI=1 MaxPCIBus=256 DMI=1 Sensor=1 SMBus=1 Display=1 UseDisplayAPI=1 BusClock=1 Chipset=1 SPD=1 CheckUpdates=1 TextFontName Font used for the information boxes. TextFontSize Size of the font used for the information boxes. TextFontColor Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code: RRGGBB LabelFontName Font used for the label boxes. LabelFontSize Size of the font used for the label boxes.

Sensor Set to OFF (or 0) disables sensor chip detection and voltages measurement. DMI Set to OFF disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. PCI Set to OFF disables the PCI information.

This disables chipset, SPD and, depending on the hardware, sensoring information. MaxPCIBus Sets the maximum PCI bus to scan.

Default value is 256. SMBus Set to OFF (or 0) disables SMBus information: SPD, and, depending on the hardware, sensoring information. Display Set to OFF (or 0) disables the video card information reported in the validator. ShowDutyCycles Set to 1, switches the alternate clock computation method based on duty cycles.

0 to disable. UseDisplayAPI Set to 1, uses the display driver to read the display adapters information. 0 to disable.

Txt=report Launch CPU-Z in ghost mode: no interface appears, the register dump (report.txt) is automatically created.Example: cpuz.exe -txt=c: mydirectory mysystem: runs CPU-Z in ghost mode. Report file mysystem.txt is automatically generated in directory c: mydirectory. -html=report Same as '-txt' but generates the html report file. -core=id Displays clock speed of core #id (id can be set from 0 to 'Number of cores minus one').

How to install dstv dish and decoder pdf. Sent from my HTC Desire using MyBroadband Android App. This method worked perfectly for me. I refused to pay 2000 for someone to install something I can do on my own. Yup I agree, will not pay for someone to install dstv for me, have moved many times and each time have succesfully installed myself and for many other people.

It is then possible to check the speed of each core by running as many instances of CPU-Z as necessary, using batch files for example: cpuz0.bat: cpuz.exe -core=0 cpuz1.bat: cpuz.exe -core=1 Note that the current core can be dynamically selected by right-clicking in the CPU page, and select the target core. This feature is available from version 1.42. -console Generates output in a command prompt (Windows XP only).